Individual multiband fluorescence bandpass filters that utilize Semrock’s patented single-substrate construction. These filters have extremely high transmission, steep and well-defined edges, and outstanding blocking between the passbands. All thin-film, hard-coated construction for unsurpassed performance and reliability.
23.3 mm x 2.0 mm
low-autofluorescence optical quality glass
Tavg > 93% 429.5 – 462.0 nm
Tavg > 93% 502.5 – 518.5 nm
Tavg > 93% 550 – 613 nm
Tavg > 93% 663 – 743 nm
0 ± 5 degrees
Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
+ 0.0 / – 0.1 mm
± 0.1 mm
≥ 22 mm
Arrow on ring indicates preferred direction of propagation of light
BrightLine filters have blocking far exceeding OD 6 as needed to ensure a black background, even when using modern low-noise CCD cameras. The blocking is optimized for microscopy applications using our exclusive SpecMaker™ fluorescence filter design.
BrightLine filters are available to fit Leica, Nikon, Olympus, Zeiss, and Aperio microscopes.
Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Arrow on ring indicates preferred direction of propagation of light.
"Reflective coating side" should face toward light source and sample.
Appelez-nous ou complétez le formulaire ci-dessous et nous vous contacterons. Nous nous efforçons de répondre à toutes vos demandes sous 24 heures.