Multi-edge dichroics have two or more transitions from high reflectance to high transmission. Semrock offers a wide range of dichroic beamsplitters that exhibit steep edges with very high reflection and transmission bands. This standard epi-fluorescence dichroic beamsplitter is optimized only for broadband light sources such as LEDs or similar light engines.
BrightLine dichroic beamsplitter for CFP/YFP imaging channels optimized for Lumencor CELESTA light engine® utilizing 445 nm & 518 nm wavelengths.
25.2 mm x 35.6 mm x 1.1 mm
low-autofluorescence optical quality glass
Ravg > 95% 439 - 459 nm
Tavg > 93% 473 - 495 nm
Ravg > 95% 510 - 530 nm
Tavg > 93% 546 - 576 nm
45 degrees (Tavg > 93%)
45 ± 1.5 degrees (Ravg > 95% & Tavg > 90%)
Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
25.2 mm x 35.6 mm
± 0.1 mm
± 0.05 mm
≥ 80% (elliptical)
Reflective surface marked with part number - Orient in direction of incoming light